........... |
![]() |
Mesuron Inc. Taking the art of bio-magnetic Measurements to the next Revolutionary level! |
...........
|
||
Business Advisory Board Scientific and Medical Advisory Board | |||||
|
|
||||
Series BA6 BA6 design is used when there is a need for a special access during measurements taking. BA6 can work in any position in relation to the measured object. The maximum cryogen volume in this design is a half of the cryogenic vessel. The cryogenic vessel must be thermo-stabilized in order for all of its parts to have the same temperature as cryogen itself. On operating only in the upside down position, the cryogen volume can occupy up to 90% of the cryogenic vessel. In this case, filing it up with cryogen is possible only in the upside down position as well.
Please, note that cryostat dimensions may differ from those in the pictures. All cryostat pictures are just examples of possible SQUID magnetometers configurations. For more custom cryostat details please contact us If you would like to submit a request for quotation, please, click here Request Form
In the Picture: D1 - The inside diameter of the cryostat neck and internal cryogenic tail D2 - Cryostat outside diameter D3 -The cryogenic vessel inside diameter D4 -The outside cryostat tail diameter L - Length of the cryostat without inserts (cap) Ln -Cryostat neck length Lb - Length of the cryogenic vessel that can be filled with cryogen, may vary on demand Lti - Internal cryogenic tail length H - Minimum Hot-to-Cold distance from the sensor to the warm surface of the cryostat bottom plate
If you have any question or would like to submit a request for Quotation, please, click here Request Form
|
|||||
|
|||||
Mesuron Inc. All rights reserved 2011 |